One of the nice things Samsung has made is the S Health program, which includes a heart rate monitor feature. This is a built-in feature of the Samsung Galaxy S9 and S9+ that allows users to use their heart rate on the go. However, if the heart rate monitor function no longer works or gives inaccurate details, there is a solution for this.
If you are interested in the details of the device, you may have noticed that a protective foil is attached to the sensor after purchase. Many users forget to remove this protective foil from the lens of their Galaxy S9 or S9+ at the factory. It’s just a thin coating and you’ll probably notice it right away.
If this protective foil is left on the sensor, the heart monitor function will probably display strange heart rate results. So now you can see that solving this problem is very easy. Simply remove the protective foil from the sensor. So, follow the steps below to remove the thin tape.
How to remove the protective foil
You’ll be even more surprised that all you need to make it work properly is…. Scotch tape. Yes, good read! This is what you need to do:
- get scotch tape
- cut a small part
- Then place the scotch over the heart rate sensor or protective foil.
- Slowly and carefully remove the tape just pasted
- Be sure to peel the film off with tape while removing the film.
- After removing the tape completely, check the monitor function again to see if it has improved.
After performing all the steps shown above, you will now know how to fix your Samsung Galaxy S9 or S9+ heart monitor function not working issue. If not, then you have to move towards third party software. Android Data Recovery Tool is designed in such a way that it is capable to solve all the android associated problems.